BIESSE SELCO SEKTOR 450 10-1/2' Front Load Automatic Panel Saw -- Specifications:Max. rip cut cap. 3,200 mm (125.98"), Max. pusher stroke 3,200 mm (125.98"), Max. saw blade projection 75 mm (2.92"), 7.5 kW (10 HP) Main & 2.2 kW (3 HP) Scoring motors, Main blade dia. 18", Scoring blade dia. 8". -- Saw Carriage:Feed speeds 1 - 120 MPM (1 - 394 FPM), Return speed 120 MPM (394 FPM). -- Pusher Fence: Forward positioning speed 60 MPM (197 FPM), Return speed 60 MPM (197 MPM), Helical rack & pinion movement on both sides to assure pusher remains parallel, Brushless servo motor, (6) Independent self-leveling grippers, with 65 mm (2.56") Opening size. -- Operator & Machine Control:"OSI (Open Selco Interface)" PC-Based Control, with 19" Display, USB & RS-232 Ports, & MICROSOFT "WINDOWS" Operating system, ZEBRA "STRIPE S4M" Bar Code Label Printer. -- Complete with:Automatic Saw Blade Height Adjustment, Quick-Change Blade System, 72” L x 4” H Fence, (3) 23-3/4” x 79-1/2” x 39-1/8” H Air Floatation Tables with 2014 MZ ASPIRATORI VP450/500 2.2 kW (3 HP) High Pressure Positive Centrifugal Blower, & Transformer.

CAIN 360-10H 120" Front Load Automatic Panel SawSpecifications: -- 120" Cutting length, 18" Diameter Blade.Equipped with: -- (1) 24" x 48" Infeed tables, (1) 24" x 120" Table with Backstop.Dimensions: 228" x 180" x 66" H

CAM-WOOD TX-P10AAT FRONT LOAD AUTOMATIC PANEL SAW: Shop Saw -- Specifications: 128" (3,250 mm) Max. rip cut cap. & 128" (3,250 mm) max. pull-back front/back; 10 HP (7.45 kW) saw blades motor, 1" dia. arbors,4" (101 mm) max. depth of cut with 355 mm (13.9") dia. blade at 4,500 RPM,160 mm (6.3") scoring blade at 6,000 RPM blade speed. -- Positioning Speed:2 HP Saw carriage drive motor, variable cutting speed from 16 - 98 FPM (5 - 30 MPM), return speed of 98 FPM (30 MPM). -- Pusher Fence: Programmable rear material push fence with servo drive, made of square tubular steel bar;0.5 HP pusher motor, rack & pinion drive, 16 - 49 FPM (5 - 15 MPM) speed. -- Operator & Machine Control:PC Controller with touch-screen to program cutting patterns or individual line cutting operation, graphic displays, self-diagnostics, machine parameter list; touch-screen keypad for data entry. -- Complete with: (3) Bakelite covered front support tables and fully covered rear table; (optional air flotation tables available at additional cost)(4) Dust collector outlets, (1) on each end of the saw base, (1) on the right side at cut-line height, and (1) on the right-hand side on top of the pressure beam. -- Available Options: &#9679 (1) TX-ATSA AUTO SIDE ALIGNMENT DEVICE = $2,300.00 additional cost; &#9679 (3) TX-PFT AIR FLOATING TABLES = $3,690.00 additional cost. -- Actual Model is CAM-WOOD TX-P10AAT

CAM-WOOD TX-P10A Front-Load Manual Panel SawSpecifications: -- 128" Max. rip cut cap. & 128" max. front/back, 10 HP saw blades motor, 1" dia. arbors; -- 4" Max. depth of cut with 355 mm (13.97") dia. blade at 4,500 RPM, 160 mm (6.30") scoring blade at 6,500 RPM blade speed. Features: -- 1 HP Saw carriage drive motor, variable cutting speed from 16 - 98 FPM, return speed of 98 FPM. Equipped with: -- (2) Flip stops and (2) air cylinder stops on fence; (3) front support tables (optional air tables available - add $ 3,690), Steel rear tables. -- (3) Dust collector outlet/connections, (1) on each end of the saw base, and (1) on the right-hand side at cut-line height.

CAM-WOOD TX-P12AAT FRONT LOAD AUTOMATIC PANEL SAW: -- Specifications: 149.6" (3,800 mm) Max. rip cut cap. & 149.6" (3,800 mm) max. pull-back front/back; 10 HP (7.45 kW) saw blades motor, 1" dia. arbors,4" (101 mm) max. depth of cut with 355 mm (13.9") dia. blade at 4,500 RPM,160 mm (6.3") scoring blade at 6,000 RPM blade speed. -- Positioning Speed:2 HP Saw carriage drive motor, variable cutting speed from 16 - 98 FPM (5 - 30 MPM), return speed of 98 FPM (30 MPM). -- Pusher Fence: Programmable rear material push fence with servo drive, made of square tubular steel bar.0.5 HP pusher motor, rack & pinion drive, 16 - 49 FPM (5 - 15 MPM) speed. -- Operator & Machine Control:PC Controller with touch-pad to program cutting patterns or individual line cutting operation, graphic displays, self-diagnostics, machine parameter list; touch-screen keypad for data entry. -- Complete with: (3) Bakelite covered front support tables and fully covered rear table; (optional air flotation tables available at additional cost)(4) Dust collector outlets, (1) on each end of the saw base, (1) on the right side at cut-line height, and (1) on the right-hand side on top of the pressure beam. -- Available Options: &#9679 (1) TX-ATSA AUTO SIDE ALIGNMENT DEVICE = $2,300.00 additional cost. &#9679 (3) TX-PFT AIR FLOATING TABLES = $3,690.00 additional cost. -- Actual Model is CAM-WOOD TX-P12AAT

CAM-WOOD TX-P330X FRONT LOAD AUTOMATIC PANEL SAW: "High Production Saw" -- Specifications: 126" (3,200 mm) Max. rip cut cap. & 126" (3,200 mm) max. pull-back front/back; 15 HP (11.2 kW) saw blades motor, 1" dia. arbors,3-1/8" (82.5 mm) max. depth of cut with 355 mm (13.9") dia. blade at 4,500 RPM,180 mm (7") scoring blade at 6,000 RPM blade speed. -- Positioning Speed:2 HP Saw carriage drive motor, variable cutting speed from 16 - 150 FPM (5 - 46 MPM), return speed of 100 FPM (30 MPM). -- Pusher/Gripper Fence: Programmable rear material push/gripper fence with AC servo drive, 1 HP pusher motor, rack & pinion drive, 16 - 80 FPM (5 - 24 MPM) speed. -- Operator & Machine Control:PC Controller with touch-screen to program cutting patterns or individual line cutting operation, graphic displays, self-diagnostics, machine parameter list; touch-screen keypad for data entry. -- Complete with: TX-ATASA automatic side alignment device, (3) Bakelite covered front support tables and fully covered rear table; (optional air flotation tables available at additional cost)(4) Dust collector outlets, (1) on each end of the saw base, (1) on the right side at cut-line height, and (1) on the right-hand side on top of the pressure beam. -- Available Options: &#9679 (3) TX-PFT AIR FLOATING TABLES = $3,690.00 additional cost. &#9679 (1) TX-P3SB THIRD JUMP SCORING UNIT = $4,290.00 additional cost. &#9679 (1) PC BASE CONTROL (Optional with OPTIMIZE SOFTWARE) = $4,890.00

GABBIANI G2 115 38/38 FRONT LOAD, AUTOMATIC PANEL SAW: -- Specifications:Working capacity 149.6" (3,800 mm) Rip & Cross-cut pull-back. Main saw blade projection is 4.5" (115 mm).20 HP (15 kW) Inverter driven, variable RPM main motor & 2 HP (1.5 kW) scoring motor. Automatic exclusion of scoring unit. Pneumatic quick-change system for blades -- Saw carriage: Feed speed from 3 - 492 FPM (1 - 150 MPM), return speed of 492 FPM (150 MPM.Automatic cutting stack height & length limiter adjusts according to the program dimensions. Automatic saw carriage lubrication. -- Pusher Fence: 0 - 230 FPM (0 - 70 MPM) Forward positioning speed, 230 FPM (70 MPM) return speed.Rack & pinion movement on both sides to assure the pusher remains parallel. (8) Total Material gripper clamps, with (4) of the grippers in the cross-cut section independent & programmable according to the cutting pattern.All gripper clamps open to 4.5" (115 mm); -- Operator & Machine Control:PC Front-end controller with SCM Maestro "eye M" + Windows operating system.21" LCD "Touch Screen" monitor display with real-time graphics + function control keypad. Virtually unlimited program storage via USB ports; RS-232 serial port, keyboard, mouse.Maestro software features machine functions, programming, run time, diagnostics, production reports, imports, language and unit of measurement, optimization cut software (Maestro Pattern)Maestro Cut 3D editor: Label printing software, 3D simulator, graphic editor, panels editor, cutting editor for figured panels, semi-automatic macro.Easy Import: This software imports from an Excel file all data related to part of a cutting list previously selected by the user to Maestro Pattern, Diagnostic for errors or machine malfunction by means of an error signal code, incremental or absolute programming in mm or inches. All enclosed in an air-conditioned control cabinet -- Complete with: Automatic Side alignment device. Min. part width 2.36", Max. part width 149". Automatic saw blade height adjustment. "Quick-change" blade system. (4) Air support tables 98" x 24" (2,500 x 600 mm), with (1) common blower. -- General Features:Automatic high performance beam saws controlled by PC/PLC “PREMIUM” control system, designed to cut to size solid wood panels, chipboards, MDF panels, multilayer panels, plywood panels and fiber panels. -- Base and Working Table:Base with a tubular steel structure with a “closed” ring shape. Worktable in Reinforced Ribbed-Steel and Coated with Anti-Scratch Phenolic Material. No. 2 Cylindrical Guides for the Saw Carriage Movement Equipped with Sliding Wheels in Ground Steel. Squaring Fence Located on the Left Side. -- Options Include:Zebra label printer. -- Actual Model is GABBIANI G2 115 38/38

GABBIANI GALAXY 125 PLM FRONT LOAD, AUTOMATIC PANEL SAW: -- Specifications:126" Overall cutting length; 4.9" (125 mm) max. saw blade projection.24 HP Main motor 3,800 RPM w/pneumatic saw blade "quick change" system, 2.4 HP scoring motor; 16.5" (420 mm) Max. main blade dia., 6.3" (160 mm) 7,600 RPM scoring blade with external adjustment. -- Saw carriage: -- Travel speed from 0 - 297 FPM; 297 FPM constant return speed; powered by TEFC AC brushless motor. -- Pusher fence: -- Variable pusher speed from 0 - 297 FPM; return 297 FPM, powered by TEFC AC brushless motor on rack & pinion system.Equipped with: -- (6) Material gripper clamps; (2) Prismatic THK guides with recirculating ball bearings and forced lubrication. -- Pressure beam: Alternate pressure beam for final trim cut; (2) automatic pneumatic side aligners with rollers on front & back of the cut line. -- Features: Optimized blade/Pressure beam stroke optimized according to book height thus obtaining better cuts and lower cut time; electronic scorer adjustment user settable via PC; Double independent side aligner crosscuts optimized, stroke 86.6" (2200 mm) by min. panel width of 2.8" (70 mm). -- Operator & Machine Control:PC Front with INTEL CELERON 2 GHz, 128 Mb RAM, 40 Gb hard disk 15" color monitor, industrial keyboard & mouse, 1.44MB & CD ROM 48X disk drives for data transfer, (2) RS-232 serial port 1 parallel, 6 USB and network card capable for downloading from the office.Includes: -- DISA dust collector shown in photos. Specifications subject to verification.

GIBEN SMART 75 SP CNC Front Load Panel Saw129" (3,300 mm) Overall cutting length, 2.95" (75 mm) max. blade projection.Specification & Features: -- 15 HP (11 kW) Main & 1.5 HP (1.1 kW) scoring motor, 3,800 RPM main saw blade & 6,000 RPM scoring blade with external adjustment. -- Saw carriage forward travel speed 16 - 131 FPM (5 - 40 MPM), return speed 131 FPM (40 MPM); powered by AC brushless motor with inverter. -- Equipped with: Programmable pusher fence with (6) material clamps that open to 2.55" (65 mm); pusher fence forward travel speed 3 - 82 FPM (.8 - 25 MPM), return speed 131 FPM (40 MPM); pusher fence powered by AC Self-braking motor on dual rack & pinion system. -- Automatic side aligner roller behind the cut line with pneumatic locking, 2.4" - 48" ( 60 - 1,220 mm) stroke. -- Features: "PC" front end controller with: Windows "XP" operating system, Pentium processor, 64 MB RAM, 4.8 GB hard drive, floppy & CD drives, (2) RS 232 serial ports, (1) PCI network slot, 15" SVGA color monitor."MOELLER" PLC, LCD Readout display & standard 102 key standard keyboard mounted on movable pendant for manual, semi-automatic, or fully automatic cycle control; G 57 includes real-time graphic display with on-board pattern planner software. -- Rear of machine with (8) in-line nylon profile rail tracks; Pressure beam w/recessed sections allows for continuous clamping over the full length of the beam including the last trim cut. -- Complete with: Safety trip bar, safety flaps at cut-line, protection fence around rear of saw,(1) Air floatation tables 79" x 20" (2,000 x 510 mm), (3) Air floatation tables 51" x 20" (1,300 x 510 mm).NOTE: PLC needs to be checked for slow response time and measuring problem. Otherwise in good condition when taken from service,

GIBEN ONIX 90 SP Automatic Horizontal Beam Panel Saw:Specifications: -- 149.6" (3,800 mm) Overall cutting length; 3.54" (105 mm) max. saw blade projection. 18 HP (13.2 kW) Main saw motor, 15" (380 mm) dia. - 3,960 RPM main blade; 1.5 HP (1.1 kW) Scoring saw motor, 7" (180 mm) dia. - 6,095 RPM scoring blade.Saw Carriage: -- Travel speed 16 - 328 FPM (5 - 100 MPM), 328 FPM (100 MPM) constant return, powered by Inverter drive. Parametrically controlled saw carriage automatically adjusts the main blade projection & cutting speed according to the program requirements.Pusher Fence: -- Programmable pusher fence with (7) Material clamps (open to 4.14"/105 mm);Pusher speed from 1 - 196 FPM (0.8 - 60 MPM), return of 196 FPM (60 MPM), powered by AC Servo motor on Rack & Pinion system. Operator & Machine Control: PC Front-End with GIBEN "G-VISION" + Windows "2K / XP" operating system; "G-VISION" on-board pattern planner/optimizer & color graphic interface; 15" color monitor. Editing feature allows programming during operation, downloading from remote PC to the machine controller is possible.Complete with: -- (4) Air float tables 79" x 20" (2,000 x 510 mm); -- Front safety flaps on the pressure beam; rear & side of machine with protective guards; -- (10) Modular rear support profile rails with non-marking rollers; -- Pneumatic side alignment w/automatic pre-positioning by "G-Drive" microprocessor, aligner stroke 2.25" - 49" (70 - 1,250 mm).

HENDRICK - PRO-AM SP, ...Front Load Panel SawSpecifications & features: -- 126" Cutting length, 5" max. cutting height, 20 HP main chain driven saw carriage travel speed from 0 - 120 FPM, 120 FPM constant return. -- Programmable fence with: 30 FPM Forward speed & return of 30 FPM; positioning by THK precision ball screws and precision linear ways. -- Equipped with: -- Full surface area phenolic (Bakelite) rear support tables, pressure beam pneumatic cylinders for holding material during final cut, and pneumatic side alignment for material up to 72" wide. -- User-friendly Programmable Controller (software updated); keypad for data entry; single cycle and fully automatic cycle mode. -- Complete with: -- (1) Large fixed table in the crosscut area and (2) short movable tables in rip area.

HOLZ-HER CUT 6120 FRONT LOAD, AUTOMATIC PANEL SAW: -- Specifications: 3,900 mm (153.5") Max. rip cut cap., 3,900 mm (153.5") pull back pusher stroke; 82 mm (3.2") saw blade projection.15 HP (11 kW) Main saw motor, 1.5 HP (1.1 kW) scoring motor. -- Saw Carriage:Variable feed speed from 3 - 320 FPM (1 - 100 MPM ), return speed of 416 FPM (130 MPM).Motorized bi-directional grooving capabilities with electronic adjustment for 0 mm - 35 mm.Automatic cutting length limiter adjusts the cutting height & cutting length at the end of the workpiece. -- Pusher Fence:(7) Material gripper clamps, (1) Double Finger mounted at the cross-cut fence location for narrow strip cutting & (6) standard clamps. 82 FPM (25 MPM) forward positioning speed, 328 FPM (100 MPM) return speed.Variable pressure settings for delicate materials. Pressure beam has an integrated "Last Cut" operation to achieve a "0" mm panel dimension.Rack & pinion movement on both sides to assure the pusher remains parallel. -- Operator & Machine Control:PC Front-End with "CUTCONTROL 2" + "EASY-PLAN" + Windows operating system,19" TFT Display with unlimited program storage; keypad for data entry, USB & RS-232 serial port, "CUTCONTROL 2" offers Real-Time 3D Moving Graphics, diagnostic for errors or machine malfunction by means of an error signal code, incremental or absolute programming in mm or inches."CUTCONTROL 2" allows the operator to easily input information for absolute, serial, format, grooves, perforations, & position cutting which allows the machine to easily adapt to various situations & materials."Opti-Cut" & "EASY-PLAN" is a very user friendly on-board Optimizing System for all types of various cutting patterns, including angled cutting -- Complete with: Non-Marking rear roller support rails: Solid Air Cushion Table before & after the cutting line, ensures easy panel handling. Pneumatic crosscut side aligner, adjustable from 0" - 82.6" (0 - 2,100 mm). Side aligner is "Fully Automatic" adjustment when panel is less than 1,300 mm (51")"Quick Change" Blade system with automatic saw blade height adjustment; Electronic positioning of the scoring blade through the NC control.(3) Adjustable via "pneumatic locking" air support tables, ea. 70.8" x 23.6" (1,800 x 600 mm); -- Actual Model is HOLZ-HER CUT 6120 Dynamic

HOLZ-HER CUT 6220 Dynamic FRONT LOAD, AUTOMATIC PANEL SAW with 20'+ RIP cutting capacity!: -- Specifications: 4,300 mm (169.2") Max. rip cut cap., 6,250 mm (246") pull back pusher stroke; 105 mm (4.1") saw blade projection;28 HP (21 kW) Main saw motor, 3 HP (2.2 kW) scoring motor. -- Saw Carriage:Variable feed speed from 3 - 426 FPM (1 - 130 MPM ), return speed of 492 FPM (150 MPM).Automatic cutting length limiter adjusts the cutting length at the end of the workpiece, automatic saw carriage lubrication. -- Pusher Fence:(10) Material gripper clamps; 82 FPM (25 MPM) forward positioning speed, 328 FPM (100 MPM) return speed.Rack & pinion movement on both sides to assure the pusher remains parallel. -- Operator & Machine Control:PC Front-End with "CUTCONTROL 2" + "EasyPlan" + Windows operating system,19" TFT Display with unlimited program storage; keypad for data entry, USB & RS-232 serial port, "CUTCONTROL 2" offers Real-Time 3D Graphics, diagnostic for errors or machine malfunction by means of an error signal code, incremental or absolute programming in mm or inches."CUTCONTROL 2" allows the operator to easily input information for absolute, serial, format, grooves, perforations, & position cutting which allows the machine to easily adapt to various situations & materials"Opti-Cut" & "EasyPlan" is a very user friendly on-board Optimizing System for all types of various cutting patterns, including angled cutting -- Complete with: Non Marking rear roller support rails; Solid Air Cushion Table before & after the cutting line, ensures easy panel handling. Pneumatic crosscut side aligner, adjustable from 0" - 82.6" (0 - 2,100 mm);Automatic saw blade height adjustment; Electronic positioning of the scoring blade through the NC control.(4) Adjustable via "pneumatic locking" air support tables, ea. 70.8" x 24" (1,800 x 509 mm); -- Actual Model is HOLZ-HER CUT 6220 Dynamic

HOLZ-HER CUT 85 FRONT LOAD, AUTOMATIC PANEL SAW: -- Specifications:4,250 mm (167") Max. rip cut cap., 3,800 mm (149") pull back pusher stroke; 97 mm (3.8") saw blade projection.15 HP (11 kW) Main saw motor, 3 HP (2.2 kW) scoring motor. -- Saw Carriage:Variable feed speed from 3 - 328 FPM (1 - 100 MPM ), return speed of 328 FPM (100 MPM).Automatic cutting length limiter adjusts the cutting length at the end of the workpiece, automatic saw carriage lubrication. -- Pusher Fence:(7) Material gripper clamps; 259 FPM (80 MPM) forward positioning speed, 259 FPM (80 MPM) return speed.Rack & pinion movement on both sides to assure the pusher remains parallel. -- Operator & Machine Control:PC Front-End with CUTCONTROL "Direct Cut" + "OPTIPRO" + Windows 2000 operating system,15" TFT Display with unlimited program storage via floppy disk, keypad for data entry, USB & RS-232 serial port, CD ROM & 1.44 MB disk drive for additional storage of programs.CUTCONTROL offers Real-Time Graphics, diagnostic for errors or machine malfunction by means of an error signal code, incremental or absolute programming in mm or inches."Direct Cut" allows the operator to easily input information for absolute, serial, format, grooves, perforations, & position cutting which allows the machine to easily adapt to various situations & materials."OPTIPRO" is a very user friendly on-board Optimizing System for all types of various cutting patterns, including angled cutting. -- Complete with: Rear roller support rails; automatic crosscut side aligner; automatic saw blade height adjustment.(3) Air support tables, ea. 78" x 24" (1,981 x 509 mm). -- Actual Model is HOLZ-HER CUT 85 4300.

HOLZMA HPP 350 43/43 FRONT LOAD, AUTOMATIC PANEL SAWSpecifications:169" (4,300 mm) cut length, 167" (4,250 mm) pull back; (80 mm) Main saw blade projection; 12 HP (9 kW) main saw motor and 3 HP (2.2 kW) scoring motor; scoring saw adjustment is from the "CADMATIC 4.0" control. -- Saw carriage: -- Travel speed from 16 - 426 FPM (5 - 130 MPM), constant return of 426 FPM (130 MPM). -- Pusher Fence: -- Overhead program fence with (6) gripper clamps, clamps open up to 90 mm (3.5"); rack & pinion drive on both sides; forward speed from 82 to 262 FPM (24 - 80 MPM), return speed of 262 FPM (80 MPM). -- Operator & Machine Control: -- HOLZMA Power Control with "CADMATIC 4.0" + "Windows XP" operating system; virtually unlimited cutting dimensions memory; TFT 17" flat screen monitor, REAL-TIME moving graphics; panel grooving & numeric display. -- Industrial keyboard, 1.44MB Floppy & CD ROM drives, capable of online operation via RS 232 or USB port for possible link to office PC. -- Complete with: -- Automatic "CENTRIC" side aligner with front & rear forks holding ripped strips squarely against the right angle fence. --(4) Front air floatation tables 86" x 25" (2,160 mm x 650 mm). -- Actual model is HOLZMA OPT. HPP 350 43/43.

HOLZMA HPP 81/38-CAD Horizontal Panel Saw - Front Load149" (3,800 mm) Cutting length, 3.3" (85 mm) cutting height, 18 HP (13.4 kW) main and 3 HP (2.2 kW) scoring motor.Specifications: -- Variable saw carriage travel speed 0 - 229 FPM (0 - 70 MPM), constant return of 229 FPM (70 MPM). -- Equipped with: Electronically controlled overhead program fence, rack & pinion driven on both sides, forward speed 131 FPM (40 MPM), return speed 131 FPM (40 MPM), via AC servo motor; (6) clamps which open up to 3.5" (90 mm). -- HOLZMA CADMATIC Control with cutting dimensions memory, numeric display, simple graphical input of cutting patterns, error diagnostics in plain text, -- Complete with: Combi-rollers rear machine table with profile rails, front with (3) air floatation tables 25" x 85" each (2,160 x 650 mm). -- Crosscut fence, automatic side pressure device for crosscutting on pressure beam.

HOMAG SAWTEQ B-300 38/38 FRONT LOAD AUTOMATIC PANEL SAW: -- Specifications:Working Capacity: 149.6'' (3800 mm) Rip cutting capacity; 145.6'' (3700 mm) Pull back capacity. Main saw blade projection 3.74'' (95 mm) 28 HP (21 kW) Main saw blade & 3 HP (2.2 kW) scoring blade; Scoring saw adjustment via "CADmatic" control. -- Saw CarriageForward speed 0 - 492 FPM (0 - 150 MPM) Saw carriage reverse speed 0 - 492 FPM (0 - 150 MPM). -- Pusher Fence:Electronically controlled overhead program fence with (6) 2-finger gripper clamps; clamps open up to 95 mm (3.7").Rack & Pinion drive on both sides, forward speed up to 296 FPM (90 MPM), return speed of 296 FPM (90 MPM). -- Operator & Machine Control:HOMAG "powerTouch2" PC Front-End with "CADmatic 5.0" Operating System "designed for industrial environments"; virtually unlimited cutting dimensions memory.21" Full HD widescreen "Touch-Screen" monitor with multi-touch display, online operation from an office PC is possible. All mounted into dust sealed, air-conditioned control cabinet."Real-Time" Cutting sequences with a new 3D assistance graphic supports the operator and is intuitive to operate, which shortens the training period and reduces errors to a minimum. This results in efficient processes and steady output.Simple handling via tapping and swiping (touch functions) with Quick change between the individual sectionsCADmatic 5.0 is Tapio compatible & open for communication with other machines and software solutions.The SAWTEQ B-300 "IntelliDivide" optimizing software is tapio-ready from installed software or directly from the tapio cloud, allowing "IntelliDivide" to recognize the machine configuration of your saw and take it into consideration for every optimization run in the cloud, completely automatically & you have the choice -- Complete with:On-Board Optimizer; Automatic "CENTRIC" side aligner with front & rear forks holding ripped strips squarely against the right-angle fence.Max. Side aligner stroke 145.6'' (3,700mm): Rear support rails with non-marking roller modules.(3) Front air flotation tables 86" x 31.5" (2,160 mm x 800 mm). CE-mark. -- Options Include:&#9679 Bar-Code Label printer & printer stand &#9679 Cut-Line air flotation & clamping pressure adjustment for delicate materials.Actual model is HOMAG SAWTEQ B-300 38/38 (aka Holzma HPP 300/3800 US EDITION)

MACMAZZA TS 90 FRONT LOAD, AUTO. PANEL SAW: -- Specifications: -- 169" Cutting length; 2.83 effective cutting height, 12 HP main saw motor. -- Features: -- Variable saw carriage travel speed 3 - 328 FPM, constant return of 328 FPM; electronically controlled overhead program fence, rack & pinion driven on both sides, forward & return speed 2 - 164 FPM, equipped with (6) clamps. -- PC-Based LENOVO 90GA computer control with CELERON Quad-Core J3455 Processor & 19" color monitor, 4 GB RAM, 1,000 GB Hard drive, (6) USB Ports. -- Complete with: -- Rear table constructed of aluminum profiles with plastic rollers, (3) front air floatation tables; side pressure device for crosscutting on pressure beam.Photos not of actual machine.

MAYER PS 9Z 3800 FRONT LOAD, AUTOMATIC PANEL SAW: -- Specifications:149.6" Cutting length (3,800 mm), 4.1" (105 mm) max saw blade projection, 20 HP main saw motor & 1.5 HP scoring motor, 355 mm dia. main blade and 127 mm dia. score blade dia. -- Saw Carriage:Saw carriage with rack & pinion drive, infinitely variable forward cutting speed from 16 - 148 FPM (5 - 45 MPM), constant return speed of 213 FPM (65 MPM): -- Pusher Fence:Electronically controlled overhead program fence with rack & pinion drive on hardened & ground guideways, forward speed 98 FPM (30 MPM), return speed197 FPM (60 MPM).Fence retracts 149.6" (3,800 mm) behind cutting line. -- Equipped with:(6) Gripper Clamps open up to 3.9" (100 mm), of which (3) are closely spaced in crosscut area and the other (3) are at equal distance in rip cut area.AC Servo motor drives on both the saw carriage and pusher fence; rear table with double row support rollers. -- Operator & Machine Control:"IPC 5000" PC Front-end control system with moving graphics displayed on 15" color monitor mounted in a pivoting console,(2) Serial & (1) parallel interfaces & SVGA graphic adaptor; data input by PC keyboard, prepared for possible direct downloading from office PC.Control System Features: Automatic cutting length (material is scanned by sensor underneath the packet on the saw bed), electronically controlled automatic cutting height adjustment, automatic trim calculation. -- Complete With:Crosscut fence (78.75"), rear side/crosscut aligner (0.75" to 51" with automatic presetting), rear slotted pressure beam to minimize offcut, (3) front mounted air floatation tables (78" x 23"), plastic segmented safety guards on front of pressure beam. -- Actual model is MAYER PS / 9Z - 3800.

MAYER PS 9Z 3800 FRONT LOAD, AUTOMATIC PANEL SAW: -- Specifications:149.6" (3,800 mm) Cutting length & Pull-back, 4.1" (105 mm) max saw blade projection, 20 HP main saw motor & 1.5 HP scoring motor, 355 mm dia. main blade and 127 mm dia. score blade dia. -- Saw Carriage:Saw carriage with rack & pinion drive, infinitely variable forward cutting speed from 16 - 148 FPM (5 - 45 MPM), constant return speed of 213 FPM (65 MPM): -- Pusher Fence:Electronically controlled overhead program fence with rack & pinion drive on hardened & ground guideways, forward speed 98 FPM (30 MPM), return speed197 FPM (60 MPM).Fence retracts 149.6" (3,800 mm) behind cutting line. -- Equipped with:(7) Gripper Clamps open up to 3.9" (100 mm), of which (3) are closely spaced in crosscut area and the other (4) are at equal distance in rip cut area.AC Servo motor drives on both the saw carriage and pusher fence; rear table with double row support rollers. -- Operator & Machine Control:"IPC 5000" PC Front-end control system with moving graphics displayed on 15" color monitor mounted in a pivoting console,(2) Serial & (1) parallel interfaces & SVGA graphic adaptor; data input by PC keyboard, prepared for possible direct downloading from office PC.Control System Features: Automatic cutting length (material is scanned by sensor underneath the packet on the saw bed), electronically controlled automatic cutting height adjustment, automatic trim calculation. -- Complete With:Crosscut fence (78-3/4"), rear side/crosscut aligner (0.75" to 51" with automatic presetting), rear slotted pressure beam to minimize offcut, (3) front mounted air floatation tables (78" x 23"), plastic segmented safety guards on front of pressure beam. -- Actual model is MAYER PS / 9Z - 3800/3800.